Skip to main content
    UnitConvertLab
    UnitConvertLAB
    Pressure Conversion

    12 Pound/sq inch to Bar

    Quick answer

    12 Pound/sq inch (psi) equals

    0.827371 bar

    To convert 12 Pound/sq inches to Bars, multiply by 0.0689475729. Therefore, 12 Pound/sq inch (psi) equals 0.827371 Bar (bar).

    Formula: bar = psi × 0.0689475729. Calculation: 12 × 0.0689475729 = 0.827371 bar.

    Convert Pound/sq inch (psi) to Bar (bar) online with our free unit converter. In pressure, 1 psi = 0.068948 bar. Explore step-by-step conversion steps, mathematical formulas, and quick conversion reference tables below.

    Worked example: converting Pound/sq inch to Bar

    1. Step 1 — start with the formula. bar = psi × 0.0689475729
    2. Step 2 — substitute your figure. 12 psi × 0.0689475729
    3. Step 3 — read the result. 12 psi = 0.827371 bar
    4. Step 4 — check it in reverse. psi = bar × 14.503773773 returns 12 psi, which matches the figure you started with.

    Pressure Converter

    29 units available

    Decimals:
    0.827371

    12 psi = 0.827371 bar

    Formula:

    bar = psi × 0.0689475729

    With your value: 12 psi = 0.82737088 bar

    Other Pound/sq inch to Bar conversions

    8 psi to bar9 psi to bar10 psi to bar11 psi to bar13 psi to bar14 psi to bar15 psi to barFull Pound/sq inch to Bar converter

    Pound/sq inch to Bar Conversion Table

    Pound/sq inch (psi)Bar (bar)
    0.50.034474
    10.068948
    20.137895
    50.344738
    100.689476
    151.034214
    201.378951
    251.723689
    503.447379
    1006.894757
    25017.236893
    50034.473786
    100068.947573

    Bar to Pound/sq inch Conversion Table

    Bar (bar)Pound/sq inch (psi)
    0.57.251887
    114.503774
    229.007548
    572.518869
    10145.037738
    15217.556607
    20290.075475
    25362.594344
    50725.188689
    1001,450.377377
    2503,625.943443
    5007,251.886887
    100014,503.773773

    Where these values come from

    Every factor on this page is traced to the document that defines it. See the full provenance dataset or our methodology.

    Pound/sq inch (psi)

    Pressure

    Exact conversion

    1 psi = 1 lbf/in² = 6894.757 293 168 361 Pa exactly.

    Source: NIST Special Publication 811, Guide for the Use of the International System of Units

    National Institute of Standards and Technology (US) · Reviewed 2026-07-01

    Bar (bar)

    Pressure

    Exact conversion

    1 bar = 100 000 Pa exactly.

    Source: Units accepted for use with the SI, SI Brochure Table 8

    Bureau International des Poids et Mesures · Reviewed 2026-07-01

    Standards and context behind Pound/sq inch to Bar

    Bar
    Exactly 100,000 pascals; not SI but widely used in Europe for tyre and hydraulic pressure.
    Gauge vs absolute
    Tyre pressures are gauge (above atmosphere); confusing them shifts the value by about 1 bar / 14.7 psi.

    How to Convert Pound/sq inch to Bar

    To convert from Pound/sq inch (psi) to Bar (bar), multiply the value by 0.0689475729.

    Formula: bar = psi × 0.0689475729

    Reverse: psi = bar × 14.503773773

    Step-by-Step Example

    1. Start with your value in Pound/sq inch. For example: 5 psi
    2. Multiply by the conversion factor: 5 x 0.0689475729
    3. The result is: 0.344738 bar

    Pound/sq inch and Bar Relationship

    This conversion bridges the US Customary / Imperial and Metric (SI) measurement systems, commonly required when translating scientific data, international engineering specifications, or trade standards. Since 1 Pound/sq inch represents a fraction of a Bar (1 Bar ≈ 14.5038 Pound/sq inches), the Bar is the larger measurement interval. Understanding the relationship between Pound/sq inch and Bar is essential for accurate calculations in physics, engineering, commerce, and daily applications.

    About Pound/sq inch

    Pounds per square inch (psi) is an imperial unit of pressure widely used in the US for tire pressure, hydraulics, and engineering.

    Common uses of Pound/sq inch: tire pressure (US), hydraulics, HVAC.

    About Bar

    The bar is a metric unit of pressure equal to 100,000 Pascals, roughly equal to atmospheric pressure at sea level.

    Common uses of Bar: tire pressure, industrial, meteorology.

    Frequently Asked Questions

    What is 12 Pound/sq inch in Bar?
    12 Pound/sq inch equals 0.827371 Bar.
    How many Bars are in 1 Pound/sq inch?
    There are exactly 0.0689475729 Bars in 1 Pound/sq inch. This means the conversion factor from Pound/sq inch to Bar is 0.0689475729.
    What is the formula to convert Pound/sq inch to Bar?
    The formula to convert Pound/sq inch to Bar is: bar = psi × 0.0689475729. For example, to convert 10 Pound/sq inches to Bars, you would multiply 10 by 0.0689475729.
    What is a Pound/sq inch?
    Pounds per square inch (psi) is an imperial unit of pressure widely used in the US for tire pressure, hydraulics, and engineering.
    What is a Bar?
    The bar is a metric unit of pressure equal to 100,000 Pascals, roughly equal to atmospheric pressure at sea level.
    What are the common uses of Pound/sq inch?
    The Pound/sq inch is commonly used in tire pressure (US), hydraulics, HVAC.
    What is 32 psi in bar?
    2.206 bar — the typical car tyre pressure.

    Related Pressure Conversions

    Pascal → BarKilopascal → BarMegapascal → BarGigapascal → BarHectopascal → BarMillibar → BarAtmosphere (std) → BarAtmosphere (tech) → BarPound/sq inch → Pascal

    Cite this page

    UnitConvertLab. (2026). 12 Pound/sq inch to Bar. UnitConvertLab. Retrieved from https://unitconvertlab.com/convert/12-psi-to-bar