Square Meter/Second to Stokes Converter

Kinematic Viscosity Converter

6 units available

Decimals:

From

To

10,000

1 m²/s = 10,000 St

Formula:

St = m²/s × 10,000

With your value: 1 m²/s = 10,000 St

Other Square Meter/Second to Stokes conversions

2 m²/s to St 3 m²/s to St 4 m²/s to St 5 m²/s to St 6 m²/s to St 7 m²/s to St 8 m²/s to St

Square Meter/Second to Stokes Conversion Table

Square Meter/Second (m²/s)	Stokes (St)
0.5	5,000
1	10,000
2	20,000
5	50,000
10	100,000
15	150,000
20	200,000
25	250,000
50	500,000
100	1,000,000
250	2,500,000
500	5,000,000
1000	10,000,000

Stokes to Square Meter/Second Conversion Table

Stokes (St)	Square Meter/Second (m²/s)
0.5	5.000000e-5
1	0.0001
2	0.0002
5	0.0005
10	0.001
15	0.0015
20	0.002
25	0.0025
50	0.005
100	0.01
250	0.025
500	0.05
1000	0.1

Where these values come from

Every factor on this page is traced to the document that defines it. See the full provenance dataset or our methodology.

Square Meter/Second (m²/s)

Kinematic Viscosity

Exact conversion

Derived quantity, square metre per second (m²/s). The stokes is exactly 10⁻⁴ m²/s by CGS definition.

Source: NIST Special Publication 811, Guide for the Use of the International System of Units

National Institute of Standards and Technology (US) · Reviewed 2026-07-01

Stokes (St)

Kinematic Viscosity

Exact conversion

Derived quantity, square metre per second (m²/s). The stokes is exactly 10⁻⁴ m²/s by CGS definition.

Source: NIST Special Publication 811, Guide for the Use of the International System of Units

National Institute of Standards and Technology (US) · Reviewed 2026-07-01

How to Convert Square Meter/Second to Stokes

To convert from Square Meter/Second (m²/s) to Stokes (St), multiply the value by 10,000.

Formula: St = m²/s × 10,000

Reverse: m²/s = St × 0.0001

Step-by-Step Example

Start with your value in Square Meter/Second. For example: 5 m²/s
Multiply by the conversion factor: 5 x 10,000
The result is: 50,000 St

About Square Meter/Second

The square meter/second (m²/s) is a unit of kinematic viscosity. One square meter/second equals 1 base unit. UnitConvertLab converts it against every other kinematic viscosity unit using this exact definition, so results are reproducible to full double precision rather than rounded lookup tables.

Common uses: kinematic viscosity calculations, engineering and science, education.

About Stokes

The stokes (St) is a unit of kinematic viscosity. One stokes equals 0.0001 base units. UnitConvertLab converts it against every other kinematic viscosity unit using this exact definition, so results are reproducible to full double precision rather than rounded lookup tables.

Common uses: kinematic viscosity calculations, engineering and science, education.

Frequently Asked Questions

How many Stokes are in 1 Square Meter/Second?

There are exactly 10,000 Stokes in 1 Square Meter/Second. This means the conversion factor from Square Meter/Second to Stokes is 10,000.

What is the formula to convert Square Meter/Second to Stokes?

The formula to convert Square Meter/Second to Stokes is: St = m²/s × 10,000. For example, to convert 10 Square Meter/Second to Stokes, you would multiply 10 by 10,000.

What is a Square Meter/Second?