Peck (US) to Cubic Meter Converter

Volume Converter

40 units available

Decimals:

From

To

0.00881

1 pk = 0.00881 m³

Formula:

m³ = pk × 0.008809768

With your value: 1 pk = 0.00880977 m³

How big is that?

Everyday references on a logarithmic scale, all expressed in peck (us) so you can sanity-check the result.

Milk carton (1/8.8e+3 your value)0.000114 pk

Kitchen bucket (1/8.8e+2 your value)0.00114 pk

Car fuel tank (1/1.8e+2 your value)0.00568 pk

Bathtub (1/44 your value)0.0227 pk

Hot tub (1/5.9 your value)0.170 pk

Your value1.00 pk

Other Peck (US) to Cubic Meter conversions

2 pk to m³ 3 pk to m³ 4 pk to m³ 5 pk to m³ 6 pk to m³ 7 pk to m³ 8 pk to m³

Peck (US) to Cubic Meter Conversion Table

Peck (US) (pk)	Cubic Meter (m³)
0.5	0.004405
1	0.00881
2	0.01762
5	0.044049
10	0.088098
15	0.132147
20	0.176195
25	0.220244
50	0.440488
100	0.880977
250	2.202442
500	4.404884
1000	8.809768

Cubic Meter to Peck (US) Conversion Table

Cubic Meter (m³)	Peck (US) (pk)
0.5	56.755184
1	113.510367
2	227.020734
5	567.551836
10	1,135.103671
15	1,702.655507
20	2,270.207343
25	2,837.759178
50	5,675.518356
100	11,351.036713
250	28,377.591782
500	56,755.183564
1000	113,510.367129

Where these values come from

Every factor on this page is traced to the document that defines it. See the full provenance dataset or our methodology.

Peck (US) (pk)

Volume

Exact conversion

Derived from the cubic metre. The litre is exactly 10⁻³ m³; US and imperial capacity units are exact multiples fixed by statute.

Source: NIST Special Publication 811, Guide for the Use of the International System of Units

National Institute of Standards and Technology (US) · Reviewed 2026-07-01

Cubic Meter (m³)

Volume

Exact conversion

Derived from the cubic metre. The litre is exactly 10⁻³ m³; US and imperial capacity units are exact multiples fixed by statute.

Source: NIST Special Publication 811, Guide for the Use of the International System of Units

National Institute of Standards and Technology (US) · Reviewed 2026-07-01

How to Convert Peck (US) to Cubic Meter

To convert from Peck (US) (pk) to Cubic Meter (m³), multiply the value by 0.008809768.

Formula: m³ = pk × 0.008809768

Reverse: pk = m³ × 113.5103671289

Step-by-Step Example

Start with your value in Peck (US). For example: 5 pk
Multiply by the conversion factor: 5 x 0.008809768
The result is: 0.044049 m³

About Peck (US)

The peck (us) (pk) is a unit of volume and capacity. One peck (us) equals 8.809768 litres. UnitConvertLab converts it against every other volume unit using this exact definition, so results are reproducible to full double precision rather than rounded lookup tables.

Common uses: volume calculations, engineering and science, education.

About Cubic Meter

The cubic meter is the SI unit of volume, equal to 1,000 liters. It is used for large-volume measurements.

Common uses: construction, water usage, shipping.

Frequently Asked Questions

How many Cubic Meter are in 1 Peck (US)?

There are exactly 0.008809768 Cubic Meter in 1 Peck (US). This means the conversion factor from Peck (US) to Cubic Meter is 0.008809768.

What is the formula to convert Peck (US) to Cubic Meter?

The formula to convert Peck (US) to Cubic Meter is: m³ = pk × 0.008809768. For example, to convert 10 Peck (US) to Cubic Meter, you would multiply 10 by 0.008809768.

What is a Peck (US)?