Skip to main content
    UnitConvertLab
    UnitConvertLAB
    Area Conversion

    Township to Section Converter

    Quick answer

    To convert Townships to Sections, multiply by 35.9999999992 (or divide by 0.0277777778). Therefore, 1 Township (twp) equals 36 Sections (section).

    Formula: section = twp × 35.9999999992. Worked example: 10 twp = 360 section.

    Convert Township (twp) to Section (section) online with our free unit converter. In area, 1 twp = 36 section. Explore step-by-step conversion steps, mathematical formulas, and quick conversion reference tables below.

    Worked example: converting Township to Section

    1. Step 1 — start with the formula. section = twp × 35.9999999992
    2. Step 2 — substitute your figure. 10 twp × 35.9999999992
    3. Step 3 — read the result. 10 twp = 360 section
    4. Step 4 — check it in reverse. twp = section × 0.0277777778 returns 10 twp, which matches the figure you started with.

    Area Converter

    20 units available

    Decimals:
    36

    1 twp = 36 section

    Formula:

    section = twp × 35.9999999992

    With your value: 1 twp = 36 section

    How big is that?

    Everyday references on a logarithmic scale, all expressed in township so you can sanity-check the result.

    Parking space (1/7.5e+6 your value)1.34e-7 twp
    Tennis court (1/3.6e+5 your value)0.00000280 twp
    Football pitch (1/1.3e+4 your value)0.0000766 twp
    Hectare (1/9.3e+3 your value)0.000107 twp
    Central Park (1/27 your value)0.0366 twp
    Your value1.00 twp

    Other Township to Section conversions

    2 twp to section3 twp to section4 twp to section5 twp to section6 twp to section7 twp to section8 twp to section

    Township to Section Conversion Table

    Township (twp)Section (section)
    0.518
    136
    272
    5180
    10360
    15540
    20720
    25900
    501,800
    1003,600
    2509,000
    50018,000
    100035,999.999999

    Section to Township Conversion Table

    Section (section)Township (twp)
    0.50.013889
    10.027778
    20.055556
    50.138889
    100.277778
    150.416667
    200.555556
    250.694444
    501.388889
    1002.777778
    2506.944444
    50013.888889
    100027.777778

    Where these values come from

    Every factor on this page is traced to the document that defines it. See the full provenance dataset or our methodology.

    Township (twp)

    Area

    Exact conversion

    Derived from the square metre via the length definitions above.

    Source: NIST Special Publication 811, Guide for the Use of the International System of Units

    National Institute of Standards and Technology (US) · Reviewed 2026-07-01

    Section (section)

    Area

    Exact conversion

    Derived from the square metre via the length definitions above.

    Source: NIST Special Publication 811, Guide for the Use of the International System of Units

    National Institute of Standards and Technology (US) · Reviewed 2026-07-01

    How to Convert Township to Section

    To convert from Township (twp) to Section (section), multiply the value by 35.9999999992.

    Formula: section = twp × 35.9999999992

    Reverse: twp = section × 0.0277777778

    Step-by-Step Example

    1. Start with your value in Township. For example: 5 twp
    2. Multiply by the conversion factor: 5 x 35.9999999992
    3. The result is: 180 section

    Township and Section Relationship

    This calculation facilitates standardized conversion between recognized units of area. Since 1 Township equals approximately 36 Sections, the Township represents a larger unit interval than the Section. Understanding the relationship between Township and Section is essential for accurate calculations in physics, engineering, commerce, and daily applications.

    About Township

    The Township (symbol: twp) is a recognized unit in the Standard measurement framework, utilized within area applications for precision and standardized data representation.

    Common uses of Township: area calculations, engineering and science, education.

    About Section

    The Section (symbol: section) is a recognized unit in the Standard measurement framework, utilized within area applications for precision and standardized data representation.

    Common uses of Section: area calculations, engineering and science, education.

    Frequently Asked Questions

    How many Sections are in 1 Township?
    There are exactly 35.9999999992 Sections in 1 Township. This means the conversion factor from Township to Section is 35.9999999992.
    What is the formula to convert Township to Section?
    The formula to convert Township to Section is: section = twp × 35.9999999992. For example, to convert 10 Townships to Sections, you would multiply 10 by 35.9999999992.
    What is a Township?
    The Township (symbol: twp) is a recognized unit in the Standard measurement framework, utilized within area applications for precision and standardized data representation.
    What is a Section?
    The Section (symbol: section) is a recognized unit in the Standard measurement framework, utilized within area applications for precision and standardized data representation.
    What are the common uses of Township?
    The Township is commonly used in area calculations, engineering and science, education.

    Related Area Conversions

    Square Meter → SectionSquare Kilometer → SectionSquare Centimeter → SectionSquare Millimeter → SectionSquare Micrometer → SectionSquare Mile → SectionSquare Yard → SectionSquare Foot → SectionSquare Inch → Section

    Cite this page

    UnitConvertLab. (2026). Township to Section converter. UnitConvertLab. Retrieved from https://unitconvertlab.com/convert/township-to-section