Skip to main content

    Convert feet to Digit (Finger-width)

    Western Europe · Historical Length · historical · ancient

    Historically reconstructed The unit is no longer in use and its value is reconstructed from historical and scholarly sources — treat it as indicative.

    1 foot = 16.256 Digit (Finger-width)

    Digit (Finger-width) = feet × 16.256

    Convert any amount

    feet =16.256 Digit (Finger-width)

    feet to Digit (Finger-width) table

    feetDigit (Finger-width)
    0.25 feet4.064 Digit (Finger-width)
    0.5 feet8.128 Digit (Finger-width)
    1 foot16.256 Digit (Finger-width)
    2 feet32.512 Digit (Finger-width)
    3 feet48.768 Digit (Finger-width)
    4 feet65.024 Digit (Finger-width)
    5 feet81.28 Digit (Finger-width)
    10 feet162.56 Digit (Finger-width)
    20 feet325.12 Digit (Finger-width)
    25 feet406.4 Digit (Finger-width)
    50 feet812.8 Digit (Finger-width)
    100 feet1,625.6 Digit (Finger-width)

    About the Digit (Finger-width)

    Finger width. 4 Digits = 1 Palm. 16 Digits = 1 Foot.

    Symbol
    digit
    Value in SI
    1 Digit (Finger-width) = 0.01875 metre
    Typical use
    general
    Source
    UnitConvertLab measurement atlas

    Every atlas conversion routes through the SI metre. See our methodology and data provenance pages for how these values are sourced and verified.

    Related units and variant risk

    Other historical length units in the Western Europe family, least settled first. If your figure came from a land record, invoice or historical document rather than a calculator, check these before assuming a single standard.

    Related conversions

    Frequently asked

    How many Digit (Finger-width) are in a foot?

    1 foot = 16.256 Digit (Finger-width). Multiply the number of feet by 16.256 to get Digit (Finger-width).

    What is Digit (Finger-width) used for?

    Finger width. 4 Digits = 1 Palm. 16 Digits = 1 Foot. It is classified as historical and dates from the ancient period.

    Is the Digit (Finger-width) value exact?

    Yes for practical purposes. UnitConvertLab converts every atlas unit through the SI metre, so the arithmetic itself introduces no rounding beyond the digits shown.

    How reliable is this Digit (Finger-width) conversion?

    Historically reconstructed — The unit is no longer in use and its value is reconstructed from historical and scholarly sources — treat it as indicative. Source: UnitConvertLab measurement atlas.

    Cite this page

    UnitConvertLab. (2026). Convert feet to Digit (Finger-width). UnitConvertLab. Retrieved from https://unitconvertlab.com/regional/foot-to-digit

    Report an incorrect value or source

    Regional units vary by district and by century. If this figure, its variant list or its citation is wrong where you are, tell us — the report carries the page context automatically.