Convert Cent to acres

One hundredth of an acre, exactly

The cent is the decimal fraction of the acre that the rest of the acre system never had. One hundred cents make one acre, so a cent is 4,046.8564224 / 100 = 40.468564224 m². Because the international acre is exactly defined against the metre, so is the cent — there is no regional variant to check, which puts it in a very small minority among the units in this atlas.

That exactness is why the cent spread. It gives a decimal handle on the acre in a market where holdings are small: a typical urban house plot in Coimbatore or Kochi is three to six cents, a figure people can hold in their heads and compare directly.

Cent, ground and ares in South India

Chennai adds a second unit, the ground, fixed at 2,400 ft² (222.97 m²) and used for larger city plots. A ground is about 5.51 cents, an awkward ratio that exists because the ground was never an acre fraction — it came from local building-plot practice, not from the survey.

Kerala records also use the are and hectare in official documents while the market quotes cents, so a sale deed can carry both. Two and a half cents make one guntha, the Deccan equivalent, which is the bridge to use when comparing land across the Western Ghats.

How cents appear in records

Patta and chitta documents in Tamil Nadu and the thandaper records in Kerala state extents in hectares and ares, with cents appearing in the market layer rather than the statutory one. Because both derive from the same surveyed area, the conversion is arithmetic rather than interpretive — a rare comfort in regional land measurement.

Where a discrepancy does appear, it is almost always because the deed area and the surveyed area differ, not because the cent was converted wrongly. Order a fresh survey (patta subdivision) rather than re-checking the conversion when the numbers refuse to reconcile.

Pricing and practical use

Because a cent is small and exact, per-cent pricing is unusually transparent, and listings across Tamil Nadu, Kerala and Puducherry are directly comparable in a way that per-bigha pricing in the north is not. The remaining variables are frontage, road width and approval status — none of which the area figure encodes.

For construction planning, note that permissible built-up area is set by floor space index against the plot area, so a cent figure converts straight into an entitlement once the local FSI is known. That is the calculation most buyers actually want, and it starts from an accurate square-metre conversion.

Where the cent is the pricing unit

In Tamil Nadu, Kerala and parts of Andhra Pradesh the cent — one hundredth of an acre, about 40.47 square metres — is the unit residential land is priced in. Advertisements quote rupees per cent, plot sizes are given in whole cents, and approval drawings state the same area in square feet, so a buyer routinely handles three representations of one plot.

The cent survives because it is small enough to describe a house plot and large enough to avoid four-digit square-foot figures in conversation. Its relationship to the acre is exact, which makes it one of the safer traditional units in this atlas: the only common error is confusing it with the ground, a much larger Chennai unit of 2,400 square feet, when a listing abbreviates both.

Common mistakes to avoid

• One hundred cents make an acre — a "half acre" is fifty cents, and quoting 40 cents as half an acre is a frequent listing error.
• A ground (2,400 ft²) is about 5.51 cents, not five; rounding it to five understates a Chennai plot by roughly 10%.
• Statutory extents in Tamil Nadu and Kerala are in hectares and ares; reconcile the cent figure to the patta before contracting.

Questions people ask about the Cent

How many cents are in one acre?

Exactly one hundred, which makes a cent 40.468564224 m² or 435.6 ft². The value is exact because the acre is exactly defined in metres.

Where is the cent used in India?

Chiefly Tamil Nadu, Kerala and Puducherry, with usage in parts of Karnataka and Andhra Pradesh. The Deccan states use guntha for the same purpose.

How many cents make one ground?

About 5.51. A ground is 2,400 ft² (222.97 m²) and a cent is 435.6 ft², so the ratio is not a whole number — a common source of error in Chennai listings.